Subaru Forester

1997-2005 of release

Specifications

Coupling

General parameters

Characteristic	Value
Type	Dry, one-disk from diaphragm spring and hydraulic drive
Extreme admissible size beats of a frictional disk, mm	1.00
Minimum admissible residual thickness frictional slips (height of their vystupaniye surfaces over heads of rivets), mm	30

Efforts of tightening of threaded connections, Nanometer

Coupling basket to a flywheel	14 ÷ 17
Bolts of a basic arm of the central bearing	47 ÷57
Nuts of fastening of the main cylinder of coupling	15 ÷ 21
Bolts of fastening of the executive cylinder	34 ÷ 40
Bolts of the basic bearing of the central bearing of the driveshaft	47 ÷ 57
Nuts of fastening of the driveshaft to differential	23 ÷ 39
Bolts of fastening of a flywheel / driving disk	69 ÷ 75
Bolts of fastening of a forward beam	47 ÷ 86
Bolts of fastening of a back beam
Forward bolts	118 ÷ 157
Back bolts	54 ÷ 83
Bolts of fastening of the torsion bar
To the engine	44 ÷ 54
To a body	47 ÷ 57
Nuts of fastening of cross thirst for a beam	58 ÷ 69

Forward power shafts

Effort of tightening of bandage tapes of protective covers of CV JOINTS, Nanometer

Collars of bigger diameter	Not less than 13.1
Collars of smaller diameter	Not less than 11.1

Efforts of tightening of threaded connections, Nanometer

Stupichny nut	186
Nut of fastening of a spherical support to the suspension bracket lever	27
Nut of fastening of a spherical support to a rotary fist	49
Fastening bolt to melting of a support of the brake mechanism	33 ÷ 42
Nut of fastening of a tip of steering draft	27

Back power shafts

Effort of tightening of bandage tapes of protective covers of CV JOINTS, Nanometer

Collars of bigger diameter	Not less than 13.1
Collars of smaller diameter	Not less than 11.1

Efforts of tightening of threaded connections, Nanometer

Stupichny nut	186
Bolt of fastening of a brake board to the internal lever	46 ÷ 58
Bolts of fastening of a brake board to stupichny assembly	46 ÷ 58
Fixture of a support of the disk brake mechanism	46 ÷ 58
Fixture of the cross lever to stupichny assembly	137
Bolt of fastening of the longitudinal lever	137
Wheel nuts	88

Back differential

Type and volume of lubricant

See Specifications of the Head Routine maintenance

Efforts of tightening of threaded connections, Nanometer

Characteristic	Value
Bolt of fastening of a lock plate of the holder of a power shaft	22 ÷ 28
Bolt of fastening of an arm of the central bearing	47 ÷ 57
Drain and jellied traffic jams	39 ÷ 59
Driveshaft flange bolt	23 ÷ 39
Forward nut of a support of the holder	56 ÷ 72
Nut of a through bolt of a support of the holder	93 ÷ 113
Nut of a flange of the leading gear wheel
T-type differential	94 ÷ 113
Differential of VA type	57 ÷ 67