Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
- Coupling, transmission line
Specifications
Coupling - the general information and check of a condition of components
Removal, check of a condition of components and installation of the main cylinder of coupling
Removal and installation of the executive cylinder of coupling
Removal of air from a hydraulic path of the drive of switching off of coupling
Forward power shafts - the general information
Removal, service and installation of forward power shafts
Removal and installation of assembly of a rotary fist, service of stupichny assembly
Back power shafts - the general information
Removal, service and installation of back power shafts
Removal, service and installation of a back nave
Back differential - the general information
Removal and installation of the driveshaft
Removal and installation of a flange of the leading gear wheel of differential and epiploon
Removal and installation of back differential
Capital repairs of differential
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Back differential - the general information On all all-wheel drive models one basic type of the back bridge is used. Identification marking is beaten out on a forward wall of differential and, - in addition, - on the label fixed on a differential cover. For definition of the transfer relation of back differential it is necessary to divide quantity of teeths of a wreath of the conducted gear wheel into quantity of teeths of the leading gear wheel (see Specifications).
The back differential represents the gipoidny assembly placed in the bearing box. The differential with restriction of slipping which separate components on the market are not delivered that means need of replacement of such differential assembled in case of an exit it out of operation can be included in the additional package. |
|