Subaru Forester

1. Disconnect a negative wire from the battery.
2. Make sure that the box of gear shifting is transferred to neutral situation.
3. The car also establish to Poddomkratta it on props.
4. Remove back wheels.
5. Remove back section of system of production of the fulfilled gases in pine forest with the muffler (see the Head of the Power supply system and release).
6. The metal thermofilter of forward section of system of release (see the Head of the Power supply system and release).
7. Uncover a forward support of differential.
8. Remove the driveshaft (see the Section Removal and installation of the driveshaft).
9. Remove the thermofilter of system of production of the fulfilled gases.
10. Otboltite basic arms of a cable of the drive of the parking brake.
11. On differentials of T-type release from assembly power shafts by means of a special stripper (28099PA100), - on differentials of VA type use mount for the same purpose.
12. Tie up the power shafts released from differential a wire to suspension bracket elements, - do not allow hang by their all weight on external CV JOINTS.
13. Remove the lower basic arm of differential.
14. Prop up assembly of differential a cart jack.
15. Otboltite differential from a beam.
16. Otboltite a forward part of differential from a stretcher.
17. Ask the assistant to hold a stretcher and slowly lower differential.
18. Shift differential before release of hairpins from a beam forward and take assembly from under the car.