Subaru Forester

1997-2005 of release

Repair and operation of the car

Specifications

Back suspension bracket

Extreme admissible size of an axial side play of a nave, mm

0.05

Efforts of tightening of threaded connections, Nanometer

Characteristic	Value
Stupichny nut	186
Bolt of fastening of a brake board to the internal lever	46 ÷ 58
Bolts of fastening of a beam of a suspension bracket (stretcher) to the car bottom	107 ÷ 147
Nut of fastening of differential to a stretcher	56 ÷ 72
Bolt of fastening of the driveshaft	24 ÷ 39
Bolt of fastening of an arm of the stabilizer of cross resistance to the internal lever	18 ÷ 22
Lock-nut of a piston rod of a rack of a suspension bracket	49 ÷ 69
Bolts of fastening are resistant to stupichny assembly	186 ÷ 235
Bolts of fastening are resistant to a body element	14 ÷ 26
Adjusting bolt of the cross lever of a back suspension bracket	83 ÷ 113

Steering drive

Verification of pressure head characteristics of the steering pump (see the Section Verification of the Pressure Head Characteristic of the Steering Pump)
Normal pressure (the gate is open), kgf/cm2	10
Dumping pressure (the gate is closed), kgf/cm2	73 ÷ 79
Working pressure (the gate is open), kgf/cm2	73 ÷ 79
Extreme admissible size of an axial side play shaft of the leading gear wheel of rack transfer, mm	0.1
Extreme admissible size of a radial side play of a shaft of the leading gear wheel of rack transfer, mm	0.18
The extreme admissible size of a side side play of a shaft of a steering rack when applying effort in 98 N (see the Section Capital repairs of the steering mechanism) mm
Right end of a shaft	0.15
Left end of a shaft
In the horizontal plane	0.15
In the vertical plane	0.30
Nominal length of a steering column, mm	814 ÷ 817

Efforts of tightening of threaded connections, Nanometer

Bolts of fastening of a back cover of the steering pump	14 ÷ 18
Bolts of fastening of the final union of the steering pump	69 ÷ 79
Nut of fastening of a pulley of the drive of the steering pump	42 ÷ 62
Bolts of fastening of a basic arm of the steering pump to the engine	18 ÷ 24
Bolt of fastening of the steering pump to a basic arm	18 ÷ 23
Bolts of fastening of assembly of rack transfer	47 ÷ 71
Bolt of fastening of the tank of the steering pump	18 ÷ 23
Koronchaty nut of a tip of steering draft	25 ÷ 29
Lock-nut of a tip of steering draft	78 ÷ 88
Fastening of steering thirst for a lath of the steering mechanism	69 ÷ 88
Bolts of the cardan hinge of a steering shaft	21 ÷ 27
Bolt of fastening of valvate assembly	20 ÷ 30
Boats of fastening of a steering shaft	20 ÷ 29
Nut of fastening of a flange of a steering wheel	39 ÷ 49
Nut of fastening of a steering wheel	29 ÷ 39
Coupling bolts of the cardan hinge	21 ÷ 26
Bolts of fastening of the module of a safety cushion (with heads like TORX)	8 ÷ 12
Bolts of fastening of assembly of the combined understeering switches	2 ÷ 3
Bolts of fastening of a knee emphasis	2.4 ÷ 4.4
Bolts of fastening of the lower section of a casing of a steering column	1.0 ÷ 1.4

Suspension bracket geometry

Height of a road gleam (see the Section Adjustment of Geometry of a Suspension Bracket) mm
Front	408 ÷ 444
Back	411 ÷ 447

Adjustment of wheels

Convergence
in front	0±1.5 mm (0 ° ±9')
behind	1.25±0.75 mm (0 °8 '±5')
Disorder
in front
models without turbocompressor	- 0 °15 '±30'
models with a turbocompressor	- 0 °20 '±30'
behind
models without turbocompressor	- 0 °15 '±30'
models with a turbocompressor	- 0 °30 '±45'
Longitudinal inclination of an axis of turn of a wheel
models without turbocompressor	2 °35'
models with a turbocompressor	2 °40 '±45'
Cross inclination of an axis of turn of a wheel
models without turbocompressor	13 °25'
models with a turbocompressor	13 °40'
Maximum angle of rotation of a wheel, internal to turn	34 °24 '±1 °30'
Maximum angle of rotation of a wheel, external to turn	30 °12 '±1 °30'

Adjustment of disorder of back and forward wheels