Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
- Routine maintenance
Schedule of routine maintenance of the Subaru Forester cars
General information
General information about settings and adjustments
Check of levels of liquids
Check of a condition of tires and pressure of their rating
Check of level of the RKPP gearbox oil
Check of the ATF level and liquid of forward differential of automatic transmission
Check of level of liquid of the power steering
Replacement of motive oil and oil filter
Check, service and charging of the rechargeable battery
Check of a condition of components of the cooling system
Check of a state and replacement of the hoses located in a motive compartment
Check of a state and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of production of the fulfilled gases
Check of level of lubricant in the transfer case of all-wheel drive models
Check of level of lubricant of back differential
Check of a condition of seat belts
Check and adjustment of turns and composition of mix of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of the operated ventilation of a case (PCV) (at the corresponding complete set of the car)
Replacement of the filtering air cleaner element
Check of a state, adjustment of effort of a tension and replacement of driving belts
Check of a condition of components of a power supply system
Check of the brake system
Adjustment of pedals of a foot brake and coupling
Check of a state and replacement of spark plugs
Check of a state and replacement of components of system of ignition
Service of the cooling system (depletion, washing and filling)
Replacement of ATF of automatic transmission
Replacement of the RKPP gearbox oil
Replacement of lubricant of the transfer case (all-wheel drive models)
Differential lubricant replacement
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system of recirculation of the fulfilled gases (EGR)
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling, transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Check of a state and replacement of brushes of screen wipers
Check of a state and replacement of brushes of screen wipers (each 12 000 km of a run or time in 6 months)
The condition of assemblies of screenwashes has to be checked regularly according to the schedule of routine maintenance of the car. Brushes look round on existence of mechanical damages, signs of weakening of fastening of components and wear of rubber working elements.
On working surfaces of brushes the road film accumulates over time that leads to noticeable decrease in efficiency of functioning of screen wipers. Regularly wash out brushes the cleaning solution of average concentration.
In the course of functioning of screen wipers there can be a gradual spontaneous otdavaniye of fixture of levers, reliability of landing and which tightening also has to be checked regularly.
At identification of cracks or signs of wear of rubber working elements their replacement is made.
|
|
| 1. Take away the screen wiper lever from glass. Wring out a lock uvula, lower a brush down the lever, release from a hook and remove. |
|
| 2. Grasp with fingers the end of a working element of a brush and, having strongly pulled, release metal inserts from frame guides. |
|
| 3. Prepare a replaceable rubber element for installation, - in case of need transfer to it metal inserts from an old brush. |
|
|
|
|
Accurately fill a working element in the directing brush framework. Make sure of reliability of fixing of an element in a frame. |
Working as it should be the return to an assembly dismantle order, install a brush on the screen wiper lever. Track reliability of fixing of a brush on the lever. |
|