Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
- Routine maintenance
Schedule of routine maintenance of the Subaru Forester cars
General information
General information about settings and adjustments
Check of levels of liquids
Check of a condition of tires and pressure of their rating
Check of level of the RKPP gearbox oil
Check of the ATF level and liquid of forward differential of automatic transmission
Check of level of liquid of the power steering
Replacement of motive oil and oil filter
Check, service and charging of the rechargeable battery
Check of a condition of components of the cooling system
Check of a state and replacement of the hoses located in a motive compartment
Check of a state and replacement of brushes of screen wipers
Rotation of wheels
Check of a condition of components of a suspension bracket and steering drive
Greasing of components of the chassis
Check of a condition of components of system of production of the fulfilled gases
Check of level of lubricant in the transfer case of all-wheel drive models
Check of level of lubricant of back differential
Check of a condition of seat belts
Check and adjustment of turns and composition of mix of idling
Check of a condition of protective covers of power shafts
Check and replacement of the valve of system of the operated ventilation of a case (PCV) (at the corresponding complete set of the car)
Replacement of the filtering air cleaner element
Check of a state, adjustment of effort of a tension and replacement of driving belts
Check of a condition of components of a power supply system
Check of the brake system
Adjustment of pedals of a foot brake and coupling
Check of a state and replacement of spark plugs
Check of a state and replacement of components of system of ignition
Service of the cooling system (depletion, washing and filling)
Replacement of ATF of automatic transmission
Replacement of the RKPP gearbox oil
Replacement of lubricant of the transfer case (all-wheel drive models)
Differential lubricant replacement
Check of a condition of components of system of catching of fuel evaporations
Check of serviceability of a condition of components of system of recirculation of the fulfilled gases (EGR)
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling, transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Check and replacement of the valve of system of the operated ventilation of a case (PCV) (at the corresponding complete set of the car)
Check and replacement of the valve of system of the operated ventilation of a case (PCV) (at the corresponding complete set of the car) (each 25 000 km of a run or times in 12 months)
|
|
Also the system of uncontrollable (constant) ventilation of a case in which the PCV valve is absent meets, and crankcase gases are sucked away from the engine continuously in the course of its functioning. |
|
|
|
|
| 1. The PCV system provides a conclusion of crankcase gases via the special valve on a hose back in the inlet pipeline from where they come to combustion chambers and are burned out during normal functioning of the engine. Besides the valve are a part of system the hose conducting from a cover of a head of cylinders to the inlet pipeline and a hose of supply of fresh air from the air cleaner under a cover of the valvate mechanism. The PCV valve with the hose connected to it usually is put in a cover of a head of cylinders. |
| 2. At the engine working at single turns, warmed up up to the normal working temperature pull the valve up and take it together with the connected hose from the landing nest in a cover of a head of cylinders. |
|
3. Press a finger to an opening in the PCV valve - depression has to be felt, otherwise make sure of passability of a hose, the union on the inlet pipeline and actually the valve. Replace defective components.
4. Kill the engine and shake the valve, - in good repair in the last the easy crash has to be heard. If no sounds are heard, replace the valve.
5. For replacement of the valve disconnect it from a hose, - try to remember how connection was organized.
6. Upon purchase of the new valve track that he answered on the standard size to the engine of your car. It will be most correct to compare the new valve to old removed from the engine directly.
7. Connect the new valve to a hose.
8. Check serviceability of a condition of all rubber hoses and plugs through passage. Replace defective components.
9. Strongly put the valve on the regular place in a cover of a head of cylinders. |
|
|
|