Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
+ Routine maintenance
- Engine
Design features and the principle of functioning of the engine, - the general information and adjustment of valvate gaps
Capital repairs and service of the engine - the general information
Check of pressure of oil
Check of compression pressure in cylinders
Diagnostics of a condition of the engine with use of the vacuum gage
Removal of the power unit from the car - preparation and precautionary measures
Removal and installation of the engine
Alternative versions of schemes of recovery repair of the engine
Order of dismantling of the engine by preparation it to capital repairs
Dismantling of the GRM drive, - removal, check of a state and installation of components
Removal, dismantling, check, assembly and installation of an axis of yokes, - SOHC engines
Removal, check of a state and installation of camshafts
Service of heads of cylinders
Service of the block of cylinders
The lubrication system - the general information
Removal, service and installation
Removal, check and installation of the oil cooler - only DOHC engines
Trial start and running in of the engine after capital repairs
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling, transmission line
+ Brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment
|
Removal, check and installation of the oil cooler - only DOHC engines
Removal
Details of installation of the oil cooler
Details of installation of the oil cooler
Details of installation of the oil cooler (continuation)
|
|
|
1. Remove a reception pipe of system of production of the fulfilled gases.
2. Remove a giving branch pipe to the oil cooler of cooling liquid.
3. Remove an oil filter.
4. Pick up the connecting phone. |
|
Check
|
|
|
1. Blow compressed air of a maslotoka.
2. Check the interfaced surface of the block of cylinders, estimate a flute condition under installation of a sealing ring. Make sure of lack of defects of an oil filter. |
|
Installation
|
|
|
1. Install the oil cooler and a connecting tube, - the sealing ring is subject to replacement without fail.
2. Connect a branch pipe of a cooling path and a reception pipe of system of production of the fulfilled gases. |
|
|
|