1. Disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action! |
2. Mark the electrical wirings and tires of grounding brought to the generator and disconnect them from assembly.
3. Weaken lock and adjusting bolts and take off a driving belt.
4. Turn out lock and axial bolts from an adjusting level of the generator.
5. When replacing the generator take the block removed from the engine in shop, - the replaceable generator has to correspond in accuracy to it on a standard size, - plugs have to have identical marking, the size and an arrangement, the identification marking which is beaten out on the case, or put on Schild has to coincide.
6. The new / restored generators can be delivered on the market without driving pulley, - in that case the last should be rearranged from old assembly. |
|