Subaru Forester

1997-2005 of release

Repair and operation of the car



Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling, transmission line
- Brake system
   Specifications
   System of anti-blocking of brakes (ABS) - the general information and diagnostic checks
   Removal and installation of the main ABS components
   Check and adjustment of height of situation and free wheeling of a pedal of a foot brake
   Adjustment of a rod of a pusher of GTTs / vacuum amplifier of brakes
   Check and adjustment of the drive of the parking brake
   Check of serviceability of functioning of the vacuum amplifier of brakes
   Replacement of brake shoes of disk brake mechanisms
   Removal and installation of supports of disk brake mechanisms
   Check of a state, removal and installation of a brake disk
   Replacement of boots and service of drum brake mechanisms of back wheels
   Removal and installation of components of assembly of the parking brake (model with disk brake mechanisms of back wheels)
   Removal and installation of the main brake cylinder
   Check of a state and replacement of brake lines and hoses
   Removal and installation of assembly of the vacuum amplifier of brakes
   Pumping of the brake system
+ Suspension bracket and steering
+ Body
+ Onboard electric equipment


Specifications

General parameters

Type and volume of brake fluid
See the Head Routine maintenance
Nominal height of provision of a pedal of a foot brake, mm
145.3
Size of a free wheeling of a pedal of a foot brake, mm
1.0 ÷ 3.0

Disk brake mechanisms

Thickness of brake shoes (taking into account a metal substrate), mm

Forward wheels
Nominal rate
17.0
Minimum admissible value
7.5
Back wheels
The minimum admissible thickness of brake shoes (taking into account a metal substrate), mm
6.5
Diameter of a brake disk, mm
Forward wheels
277
Back wheels
266

Extreme admissible size of a cross beating, mm

Forward disk
0.075
Back disk
0.1

Thickness of a disk, mm

Forward disk
Nominal rate
24.0
Extreme admissible value
22.0
Back disk
Nominal rate
10.0
Extreme admissible value
8.5
Diameter of the wheel cylinder, mm
26.97

Parking brake of disk back brake mechanisms

Diameter of a drum, mm

Nominal rate
170.0
Extreme admissible value
171.0
Course of the lever of the parking brake
7-8 clicks

Drum brake mechanisms

Diameter of a drum, mm

Nominal rate
229.0
Extreme admissible value
230.6
Diameter of the wheel cylinder, mm
19
Maximum-permissible thickness of overlays of brake boots, mm
1.5

ABS

The size of an air gap between the wheel sensor and teeths of its alarm rotor, mm

Sensors of forward wheels
0.9 ÷ 1.4
Sensors of back wheels
0.8 ÷ 1.2
Maximum admissible size of a beating of an alarm rotor / ступичной assemblies, mm
0.05

Efforts of tightening of threaded connections, Nanometer

The size of an air gap between the wheel sensor and teeths of its alarm rotor, mm

Bolts of fastening of a brake board
46 ÷ 58
Nut of fastening of the vacuum amplifier of brakes
12 ÷ 23
Cap nut of nipple connection
fastenings of the brake line to a support
14 ÷ 18
Cap nut of nipple connection of fastening of the brake line to the wheel cylinder
14 ÷ 18

The directing support finger

Models with a single-cylinder support
22 ÷ 31
Models with a two-cylinder support
34 ÷ 44
Bolt of the directing finger
31 ÷ 41
Bolt of fastening of a support to an anchor bracket
39
Nut of fastening of GTTs
10 ÷ 18
Bolts of fastening of a cable of the drive of the parking brake
23 ÷ 37
Bolts of fastening of the valve limiter
9 ÷ 17

Bolts of fastening of an anchor bracket to a nave

Lobbies
78
Back
52
Stupichny nut
186
Wheel nuts
78 ÷ 98
Pumping gates
7.0 ÷ 9.0
Lock bolt of GTTs
1.4 ÷ 2.7
Lock-nut of the lever of the drive of the parking brake
4.4 ÷ 7.4
ABS sensors
32