Subaru Forester

1  —  the Rack
2  —  the Lower saddle of a spring
3  —  the Damper
4  —  the Screw spring
5  —  the Protective cover
6  —  the Top saddle of a spring
7  —  the Top support of a rack
8  —  the Cover of the top support of a rack
9  —  the Adapter (only for the Outback models)
10  —  the Bar of the stabilizer of cross stability
11  —  the Assembly bracket of fastening of the stabilizer of cross stability
12  —  the Plug of a fixing collar
13  —  the Collar of fastening of the stabilizer of cross stability
14  —  the Landing plug of a cross beam
15  —  the Back cross beam
16  —  the Washer

17  —  the Cup
18  —  the Intensifying bracket (only for the Sedan models)
19  —  the Axial plug of fastening of the internal end of the forward cross lever of a suspension bracket
20  —  the Forward cross lever
21  —  the Axial plug of fastening of the internal end of the back cross lever of a suspension bracket
22  —  the Back cross lever
23  —  the Rack of the stabilizer of cross stability
24  —  the Axial plug of fastening of the external end of the back cross lever of a suspension bracket
25  —  the Axial plug of fastening of the external end of the forward cross lever of a suspension bracket
26  —  the Back axial plug of fastening of the longitudinal lever of a suspension bracket
27  —  the Longitudinal lever of a suspension bracket
28  —  the Forward axial plug of fastening of the longitudinal lever
29  —  the Basic arm of fastening of the forward end of the longitudinal lever

 PERFORMANCE ORDER

Final tightening of bolts of fastening of cross levers is made after lowering of the car on the earth. Track correctness of combination of the landing tags put in the course of dismantle. Tighten all fixture with the required effort.