Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling, transmission line
+ Brake system
- Suspension bracket and steering
Specifications
Check of a condition of spherical support of a forward suspension bracket
Check of a condition of forward wheel bearings
Removal and installation of a cross beam of a forward suspension bracket
Removal and installation of a rotary fist with the wheel bearing, service of stupichny assembly
Removal and installation of the lower lever of a forward suspension bracket with a spherical support
Service of racks of a forward suspension bracket
Removal and installation of the forward stabilizer of cross stability
Check of a condition of back wheel bearings
Removal and installation of a cross beam (stretcher) of a back suspension bracket
Removal, service and installation of racks of a back suspension bracket
Removal and installation of back wheel bearings
Pumping of a hydraulic path of the steering drive
Adjustment of a side play of gearing of rack transfer
Verification of the pressure head characteristic of the steering pump
Check of effort of rotation of the steering mechanism
Removal and installation of the steering pump
Removal and installation of the steering mechanism
Capital repairs of the steering pump
Capital repairs of the steering mechanism
Steering column, - the general information, precautionary measures
Removal and installation of the module of a safety cushion
Removal and installation of a steering wheel
Removal and installation of assembly of the combined understeering switches
Removal and installation of the lock of ignition/blocking of a steering column
Removal and installation of a steering column
Capital repairs of a steering column
Wheels and tires - the general information
Adjustment of geometry of a suspension bracket
+ Body
+ Onboard electric equipment
|
Removal and installation of the steering mechanism
Removal
|
|
1. Disconnect a negative wire from the battery.
|
|
If the stereosystem established on the car is equipped with a security code before disconnecting the battery make sure that you have the correct combination for input of the audio system in action! |
2. The car also establish to Poddomkratta it on props. Remove forward wheels.
3. Remove a reception pipe of system of production of the fulfilled gases (see the Head of the Power supply system and release).
4. Take forelocks and give koronchaty nuts of tips of steering drafts.
5. Release tips of drafts from assemblies of rotary fists.
6. Remove a poddomkratny plate of a cross beam of a forward suspension bracket and the stabilizer of cross stability.
7. Disconnect the central hydraulic line from a case of rack transfer, and, rotating a steering wheel from an emphasis against the stop, merge hydraulic liquid from a tube.
8. Working in a similar manner, merge hydraulic liquid from other hydraulic lines of the steering mechanism.
9. Mark adjusting position of the cardan hinge of a steering column, then turn out the lower and top coupling bolts of hinged assembly.
10. Take away assembly of the cardan hinge up and disconnect the hydraulic lines connecting a case of the steering mechanism to the control valve, - disconnect from valvate assembly the top and lower hydraulic tubes, respectively.
11. Turn out bolts of fastening of assembly of the steering mechanism to a cross beam of a suspension bracket. |
|
Installation
|
|