Subaru Forester

1997-2005 of release

Repair and operation of the car


Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling, transmission line
+ Brake system
- Suspension bracket and steering
   Specifications
   Check of a condition of spherical support of a forward suspension bracket
   Check of a condition of forward wheel bearings
   Removal and installation of a cross beam of a forward suspension bracket
   Removal and installation of a rotary fist with the wheel bearing, service of stupichny assembly
   Removal and installation of the lower lever of a forward suspension bracket with a spherical support
   Service of racks of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability
   Check of a condition of back wheel bearings
   Removal and installation of a cross beam (stretcher) of a back suspension bracket
   Removal, service and installation of racks of a back suspension bracket
   Removal and installation of back wheel bearings
   Pumping of a hydraulic path of the steering drive
   Adjustment of a side play of gearing of rack transfer
   Verification of the pressure head characteristic of the steering pump
   Check of effort of rotation of the steering mechanism
   Removal and installation of the steering pump
   Removal and installation of the steering mechanism
   Capital repairs of the steering pump
   Capital repairs of the steering mechanism
   Steering column, - the general information, precautionary measures
   Removal and installation of the module of a safety cushion
   Removal and installation of a steering wheel
   Removal and installation of assembly of the combined understeering switches
   Removal and installation of the lock of ignition/blocking of a steering column
   Removal and installation of a steering column
   Capital repairs of a steering column
   Wheels and tires - the general information
   Adjustment of geometry of a suspension bracket
+ Body
+ Onboard electric equipment


Removal and installation of assembly of the combined understeering switches

Removal

Design of a steering column

1  —  the Plug
2  —  the Steering shaft
3  —  Assembly of the understeering switch with the contact cable reel
4  —  the Casing
5  —  the Knee emphasis
6  —  the Steering wheel
7  —  the safety cushion Module


 PERFORMANCE ORDER

1. Remove a steering wheel (see the Section Removal and installation of a steering wheel).
2. Remove the top and lower sections of a casing of a steering column.
3. Turn out three fixing screws and remove assembly of the combined switches from a steering column.


Installation

Centering of the contact cable reel of a steering column


 PERFORMANCE ORDER

1. Make sure that forward wheels are still developed in rectilinear situation.
2. Make sure that levers of understeering switches are transferred to situation "Vykl" (OFF).
3. Establish assembly of switches on the regular place on a steering column.
4. Deploy the spring cable reel against the stop counterclockwise, then return back it approximately on 2.65 a turn (on the indicator the inscription "CENTER" has to appear) and achieve combination of the aligning arrow tags.
6. Further installation is made as it should be, the return to dismantle of components.
7. In conclusion do not forget to make SRS activation (see the Head Onboard electric equipment) and make sure of serviceability of operation of a control lamp of safety cushions.