Subaru Forester

1997-2005 of release

Repair and operation of the car


Subaru Forester
+ Subaru Forester cars
+ Maintenance instruction
+ Routine maintenance
+ Engine
+ Cooling systems, heating
+ Power supply system and release
+ Engine electric equipment
+ Control systems of the engine
+ Gear shifting box
+ Coupling, transmission line
+ Brake system
- Suspension bracket and steering
   Specifications
   Check of a condition of spherical support of a forward suspension bracket
   Check of a condition of forward wheel bearings
   Removal and installation of a cross beam of a forward suspension bracket
   Removal and installation of a rotary fist with the wheel bearing, service of stupichny assembly
   Removal and installation of the lower lever of a forward suspension bracket with a spherical support
   Service of racks of a forward suspension bracket
   Removal and installation of the forward stabilizer of cross stability
   Check of a condition of back wheel bearings
   Removal and installation of a cross beam (stretcher) of a back suspension bracket
   Removal, service and installation of racks of a back suspension bracket
   Removal and installation of back wheel bearings
   Pumping of a hydraulic path of the steering drive
   Adjustment of a side play of gearing of rack transfer
   Verification of the pressure head characteristic of the steering pump
   Check of effort of rotation of the steering mechanism
   Removal and installation of the steering pump
   Removal and installation of the steering mechanism
   Capital repairs of the steering pump
   Capital repairs of the steering mechanism
   Steering column, - the general information, precautionary measures
   Removal and installation of the module of a safety cushion
   Removal and installation of a steering wheel
   Removal and installation of assembly of the combined understeering switches
   Removal and installation of the lock of ignition/blocking of a steering column
   Removal and installation of a steering column
   Capital repairs of a steering column
   Wheels and tires - the general information
   Adjustment of geometry of a suspension bracket
+ Body
+ Onboard electric equipment


Removal and installation of the lower lever of a forward suspension bracket with a spherical support

Removal

Design of a forward suspension bracket

1  —  the Cross beam of a suspension bracket
2  —  the Bar of the stabilizer of cross stability
3  —  the Rotary fist
4  —  the Back axial plug of fastening of the lower managing director of the lever of a suspension bracket
5  —  the Forward axial plug of fastening of the lower managing director of the lever of a suspension bracket
6  —  Nizhny Novgorod the operating suspension bracket lever
7  —  the Lower spherical support
8  —  the Plug of fastening of the stabilizer of cross stability
9  —  the Rack of the stabilizer of cross stability

10  —  the Top support of a rack
11  —  the Remote washer
12  —  the Top plate of a spring
13  —  the Rubber saddle of a spring
14  —  the Protective cover
15  —  the Damper
16  —  the Screw spring
17  —  Mak Fersonga Is firm


 PERFORMANCE ORDER

1. The car also establish to Poddomkratta it on props. Remove forward wheels.
2. Disconnect a bar of the stabilizer of cross stability from the corresponding lower lever of a suspension bracket.
3. Turn out a coupling bolt of the lower spherical support and release the last from assembly of a rotary fist.
4. Turn out a fixing bolt and separate the lower lever from a suspension bracket beam.
5. Give a nut of fastening of the back end of the lever in the axial plug fixed on the car bottom.
6. Using the big screw-driver as the lever, carefully take away outside a rotary fist, - do not allow extension of a protective cover of the CV JOINT more than on 4 mm, - and take the lower lever from under the car.
7. In case of need give a fixing nut and remove a spherical support from the lower lever.


Installation

Installation is made upside-down. Before installation attentively study a condition of rubber plugs, - replace defective components. Also all forelocks are subject to replacement.

Final tightening of a bolt of fastening of the lower lever to a beam of a suspension bracket is made after lowering of the car on the earth! Track that all fixture was tightened with the required effort.