Adjustment of a side play of gearing of rack transfer
Design of the steering drive
1 — the Protective cover 2 — the With-shaped lock ring 3 — the Epiploon 5 — the Casing of valvate assembly 6 — the Shaft of the drive of the steering mechanism 7 — the Epiploon 8 — the Duplicating washer 9 — the Bearing 10 — the Lock ring 11 — the Coupling 12 — the Adjusting ring 13 — the Lock-nut 14 — the Plug of a fixing collar 15 — the Epiploon
16 — the Duplicating washer 17 — the Case of the steering mechanism 18 — the Lock washer 19 — the Internal tip of steering draft 20 — the Bandage tape 21 — the Protective cover 22 — the External tip of steering draft 23 — the Remote plug 24 — the Lock ring 25 — the Emphasis of a steering rack 26 — the Sealing cuff 27 — the Basic plug of a lath 28 — the Sealing ring 29 — the Lath of the steering mechanism 30 — the Piston ring
PERFORMANCE ORDER
1 Weaken a lock-nut of the adjusting screw. 2 Tighten the adjusting screw with effort of 7.4 Nanometers, then release it on 25 °. 3 Fix the screw and tighten a lock-nut with the required effort (29 ÷ 49 Nanometers).